RHA Wireless Flight Adapter lets you use your Bluetooth headphones on the plane

There are lots of quality wireless Bluetooth noise cancelling headphones and earphones on the market which are great when paired to a mobile device but how can you keep using them wirelessly on a plane? With the RHA Wireless Flight Adaptor – that’s how.

The RHA Wireless Flight Adaptor is slightly smaller than an Apple AirPods case.

It contains a transmitter that can turn any audio signal from a device with a 3.5mm headphone jack or double 3.5mm in-flight entertainment socket into a high-fidelity Bluetooth signal.

That means it will work with any pair of wireless headphones and earphones and turn your in-flight experience into a wireless one.

All Bluetooth noise cancelling headphones come with a cable and an adapter to allow the user to plug into the airline entertainment system.

But now, with the RHA Wireless Flight Adapter, you can keep the cable in the case and enjoy your in-flight entertainment wirelessly.

Bluetooth noise cancelling earphones like the Sony WF-1000XM3 don’t offer the cable option so the RHA Wireless Flight Adapter is a perfect companion device.

The unit has two plugs which can be used separately and together thanks to the neat swivel system that allows the plug to be pulled out when needed.

The plugs can be positioned at numerous angles so they can stay out of your way when connected to the in-flight system or to your device.

The plugs can be swivelled back into the casing when you’re not using them

And the RHA Wireless Flight Adapter isn’t just limited to use during your flight.

Any product with a 3.5mm headphone jack can be turned into a wireless Bluetooth device with the RHA Wireless Flight Adapter.

The first thing we tried it on was our old iPod and it not only connected us wirelessly to the Sony WF-1000XM3 wireless noise cancelling earphones – it also sounded great as well.

The device will also come in handy at the gym to allow you to connect your wireless earphones to the machine you’re using.

Other devices without Bluetooth yet that still have a 3.5 mm headphone jack including televisions and portable gaming systems can also be turned into wireless products with the RHA Wireless Flight Adapter.

The device only has a single button that is used to turn it on and to place it into pairing mode.

It’s easy to link it to a wireless device by placing the RHA Wireless Flight Adapter into pairing mode by pressing and holding the button for three seconds until the light starts blinking blue.

Then the nearest headphones or earphones which are also in pairing mode will link to the adapter.

It uses proximity to link to that nearest device because there is no screen on the adapter or the headphones.

We connected the Sony WF-1000XM3 noise cancelling earphones in a matter of seconds.

And the good thing is that next time you need to connect the devices they remember each other.

In fact, it can remember up to eight headphones and earphones, and link up instantly if it’s in the vicinity when the adapter is switched on.

You can even pair a second pair of headphones to the RHA Wireless Flight Adapter so can watch the same movie, listen to the same music or share the same podcast.

The RHA Wireless Flight Adapter uses the aptX codec so for Bluetooth streaming of high audio quality.

Also on board is aptX low latency which means what you see and what you hear while watching videos or playing games are perfectly in sync.

The on-board battery of the RHA Wireless Flight Adapter runs for up to 16 hours which is more than enough for even the longest flight.

And the product is backed by a three-year international warranty.

The RHA Wireless Flight Adapter is available now and are priced at $US49 on Amazon.


The RHA Wireless Flight Adapter is a must for any traveller to use their Bluetooth headphones and earphones to wirelessly connect to an in-flight entertainment system or any other device with a 3.5mm headphone jack.

Comments (0)
Add Comment